![[Flo-Products Company Logo]](images/fplogo1.gif)
|
|
|
are available from these manufacturers: |
| DynaQuip Controls | Dynamic Fluid Components, Inc. |
| Hydac Corp. (formerly Hycon Corp.) | Lenz, Inc. |
| SVF Flow Controls, Inc. | Sizto Tech Corp. |
DynaQuip Controls |
 |
Series VNH One-Piece Mini Ball ValvesThe VNH Series mini ball valves are designed for air, water, fuels, gases and liquids. The space saving bar stock design features bottom loaded stem, chrome plated brass ball and body, PTFE seats and Viton stem seal. Wing shaped nylon handle provides operating ease and a short turning radius, allowing close valve installation. Available with female NPT threads in sizes 1/8" thru 1/2". Available with female NPT and male NPT threads in sizes 1/4" thru 1/2". Pressure rating is 450 psi CWP. Temperature range is -4° to 200°F.Series VNH Specifications and Options |
|
Series VNH Two-Piece Safety Exhaust Valves for Compressed Air ServiceDynaQuip safety exhaust ball valves automatically and continuously vent residual air on the down-stream side when the valve is turned off (closed). Lockout handle can be padlocked (standard 9/16" shackle size locks) only in this position. With this type of venting action and lockout design, the ball valve ensures air-powered equipment is safe to service. Body is forged brass. Available with female NPT threads in sizes 1/4" thru 1". Threaded exhaust port is 10-32 UNF. Optional multiple lockout clasp or 5/16" shackle size. Pressure rating is 200 psi. Temperature range is 40° to 140°F.Series VNH2 Specifications and Options |
|
Series VMH Two-Piece Screwed Body Valve for Commercial and General Industrial ApplicationsThese DynaQuip valves are forged from brass with chrome plated brass ball. They are rated for LP and natural gas. Factory Mutual has approved these valves for fire protection systems. Available with female NPT threads in sizes 1/4" thru 2" as full port; and in sizes 2-1/2" and 3" as standard port. Available with male and female NPT threads in sizes 1/4" thru 1". Optional tee handles and lockout handles are available. Pressure rating is 600 psi CWP (non-shock) and 150 psi WSP. Temperature range is -20° to 370°F.Series VMH Specifications and Options |
|
Series VMA Two-Piece Screwed Body Valve for Commercial and General Industrial ApplicationsThese DynaQuip valves are forged from bronze with chrome plated brass ball. Available with female NPT threads in sizes 1/4" thru 1/2" as full port; and in sizes 3/4" thru 2" as standard port. Optional stainless steel trim, stainless lever handle and lockout handles are available. Pressure rating is 600 psi CWP (non-shock) and 150 psi WSP. Temperature range is -20° to 425°F.Series VMA Specifications and Options |
|
Series VBA Three-Piece Bolted In-Line Valves for General Media ServiceThese DynaQuip valves are forged from bronze with chrome plated brass ball. Available with female NPT threads in sizes 1/4" thru 2" as full port. Optional stainless steel trime and lockout handles are available. Pressure rating is 600 psi CWP (non-shock) and 150 psi WSP. Temperature range is -20° to 370°F.Series VBA Specifications and Options |
|
Series VME1 Two-Piece Screwed Body Valves for Hydraulic, Petroleum and General Industrial ApplicationsThese DynaQuip valves are available with three different seat materials: RTFE, nylon and Delrin. Bodies are Carbon steel with a zinc phosphate coating. RTFE seats are rated at 2000 psi CWP (non-shock) for sizes 1/4" to 1", and 1500 psi CWP (non-shock) for sizes 1-1/4" to 2". Temperature range for RTFE is -20° to 425°F. Nylon seats are rated at 3000 psi CWP (non-shock) for sizes 1/4" and 3/8". Delrin seats are rated at 2000 psi CWP (non-shock) for sizes 1-1/4" to 2". Nylon and Delron seats have a temperature range of -20° to 180°F. Steam rating is 150 psi WSP for all seat types. Available with female NPT threads in sizes 1/4" and 3/8" with full port. Available with female NPT threads in sizes 1/2" thru 2" with standard port. Options include 316 stainless steel trim, gull wing handle, lockout handle and oval handle.Series VME1 Specifications and Options |
|
Series VME3 One-Piece Economy Valves for Hydraulic, Petroleum and Chemical Plant ApplicationsThese DynaQuip valves are available with three different seat materials: RTFE, nylon and Delrin. Bodies are Carbon steel with a zinc phosphate coating. RTFE seats are rated at 2000 psi CWP (non-shock) for sizes 1/2" to 1-1/4", and 1500 psi CWP (non-shock) for sizes 1-1/2" to 2". Temperature range for RTFE is -20° to 425°F. Nylon seats are rated at 3000 psi CWP (non-shock) for 1/2" size. Delrin seats are rated at 2000 psi CWP (non-shock) for sizes 1-1/2" to 2". Nylon and Delron seats have a temperature range of -20° to 180°F. Steam rating is 150 psi WSP for all seat types. Available with female NPT threads in sizes 1/2" thru 2" with reduced port. Options include 316 stainless steel trim, gull wing handle, lockout handle and oval handle.Series VME3 Specifications and Options |
|
Series VLE Two-Piece Medium Pressure Hydraulic ValvesThese DynaQuip valves are available with either NPT threads or SAE O-Ring Boss connections. Body is carbon steel. Female NPT threads in sizes 1/4" thru 1" with full port. SAE O-Ring Boss threads in sizes 1/4" thru 1" full port. Options include lockout lever handle. Pressure rating is 3000 psi CWP and steam rated at 150 psi WSP. Temperature range is -20° to 425°F.Series VLE Specifications and Options |
|
Series VAE Two/Three-Piece High Pressure Hydraulic ValvesThese DynaQuip valves are available with either NPT threads or SAE O-Ring Boss connections. Body is carbon steel. Female NPT threads in sizes 1/4" thru 2" with full port. SAE O-Ring Boss threads in sizes 1/4" thru 2" full port. Options include lockout lever handle kit. Pressure rating is 7000 psi CWP for sizes 1/4" and 3/8". Pressure rating is 5800 psi CWP for sizes 1/2". Pressure rating is 4600 psi CWP for sizes 3/4" to 2". Temperature range is -20° to 175°F.Series VAE Specifications and Options |
|
Series VBE Three-Piece Bolted In-Line Maintenance Valves for General Chemical Service ApplicationsThese DynaQuip valves are available with either NPT threads or socket weld connections. Body is carbon steel. Female NPT threads in sizes 1/4" thru 2" with full port. Socket Weld in sizes 1/2" thru 2" full port. Options include lockout lever handle and lockout oval handle. Pressure rating is 1000 psi CWP and steam rated at 150 psi WSP. Temperature range is -20° to 425°F.Series VBE Specifications and Options |
|
Series VBT4 Sanitary 2-way Ball ValvesThese DynaQuip valves are available with t-clamp connections polished with 180 grit ID polish. Body is carbon steel. T-clamp sizes are 1/2" thru 4" with full port. Options include extended tube weld end connections, cavity fill seats, and locking device. Pressure rating is 300 psi. Temperature range is -20° to 400°F.Series VBT4 Specifications and Options |
|
Series VYT Sanitary 3-way Ball ValvesThese DynaQuip valves are available with t-clamp connections polished with 180 grit ID polish. Body is carbon steel. T-clamp sizes are 1/2" thru 4" with full port. Ball is L-port, 90° turn. Options include locking device. Pressure rating is 1000 psi CWP for 1/2" and 3/4". Pressure rating is 800 psi CWP for 1" and 1-1/2". Pressure rating is 600 psi CWP for 2", 3" and 4". Temperature range is -20° to 450°F.Series VYT Specifications and Options |
|
Series VMB Two-Piece Screwed Body Valves for General Chemical ServiceThe VMB series is available in stainless steel and meets NACE standard MRO175. It has female NPT threads in sizes 1/4" and 3/8" with full port and female NPT threads in sizes 1/2" thru 2" with standard port. Options include lockout lever handle or oval handle. Pressure range is 2000 psi CWP (non-shock) for sizes 1/4" to 1" and 1500 psi CWP (non-shock) for sizes 1-1/4" to 2". All sizes steam rated at 150 psi WSP. Temperature range is -20° to 425°F.Series VMB Specifications and Options |
|
Series VBS Three-Piece Bolted In-Line Maintenance Valves for Food and General Chemical Service AppliacationsDynaQuip Series VBS stainless steel valves are available as either threaded or socket weld connection. Available with female NPT threads in sizes 1/4" thru 2" with full port. Available with Socket Weld in sizes 1/2" thru 2" with full port. Options include lockout lever handle and lockout oval handles available. Pressure range is 1000 psi CWP (non-shock) and steam rated at 150 psi WSP. Temperature range is -20° to 425°F.Series VBS Specifications and Options |
|
Series VYSA 3-way Utility Ball ValvesDynaQuip Series VYSA stainless steel valves are available as NPT threaded connection with female threads in sizes 1/2" thru 2" with full port. Options include locking device. Pressure range is 1000 psi CWP for sizes 1/2" to 1"; and 800 psi CWP for sizes 1-1/2" to 2". Temperature range is -20° to 450°F.Series VYSA Specifications and Options |
|
Series 899/892 Butterfly Valves for General Service AppliacationsDynaQuip Series 899 (wafer) and 892 (lug) Resilient Seat Split Wafer Design style valves are available in sizes from 1" to 12" and 2" to 12" respectively. Lug style has drilled and tapped lugs meeting ANSI 125/150 flange standards. Wafer style has appropriate holes and slots for mounting in piping systems. Primary body material is ductile iron. Wafer style is also available in aluminum, anodized aluminum, aluminum bronze, stainless steel, PTFE coated and sever corrosion resistant platings. Options include 5 and 10 position handle, gear operator and electric or pneumatic actuators. Pressure range is 150 psi for full cut disc and 100 psi for PTFE or elastomer covered discs. Temperature range is dependent on the type of seats and ranges from -50° to 350°F up to 0° to 350°F. See the Available Seat Material Chart for seat types.Series 899/892 Specifications and Options |
|
Series 899/892 Butterfly Valves for Food and Beverage AppliacationsDynaQuip Series 899 (wafer) and 892 (lug) Resilient Seat Split Wafer Design style valves are available in sizes from 1" to 12" and 2" to 12" respectively. Lug style has drilled and tapped lugs meeting ANSI 125/150 flange standards. Wafer style has appropriate holes and slots for mounting in piping systems. Primary body material is ductile iron. Wafer style is also available in aluminum, anodized aluminum, aluminum bronze, stainless steel, PTFE coated and sever corrosion resistant platings. Food grade seats and food grade disc coating are available. Options include 5 and 10 position handle, gear operator and electric or pneumatic actuators. Pressure range is 150 psi for full cut disc and 100 psi for PTFE or elastomer covered discs. Temperature range is dependent on the type of seats and ranges from -50° to 350°F up to 0° to 350°F. See the Available Seat Material Chart for seat types.Series 899/892 Specifications and Options |
|
Series 500/522 Butterfly Valves for General Industrial Service AppliacationsDynaQuip Series 500 (wafer) and 522 (lug) Resilient Seat style valves are available in sizes from 2" to 12". Lug style has drilled and tapped lugs meeting ANSI 125/150 flange standards. Wafer style has appropriate holes and slots for mounting in piping systems. Primary body material is ductile iron. Wafer style is also available in aluminum, anodized aluminum, aluminum bronze, stainless steel, Teflon coated and sever corrosion resistant platings. Options include 5 and 10 position handle, gear operator and electric or pneumatic actuators. Pressure range is 150 psi for full cut disk and 50 psi for under cut disks. Temperature range is dependent on the type of seats and ranges from -50° to 350°F up to 0° to 350°F. See the Available Seat Material Chart for seat types.Series 500/522 Specifications and Options |
|
Series 600/622 Butterfly Valves for General Service AppliacationsDynaQuip Series 600 (wafer) and 622 (lug) Cartridge Seat style valves are available in sizes from 2" to 30". Lug style is available in ductile iron and has drilled and tapped lugs meeting ANSI 125/150 flange standards. Wafer style has appropriate holes and slots for mounting in piping systems. Primary body material for the wafer style is cast iron. Wafer style is also available in ductile iron. Options include 10 position handle, gear operator and electric or pneumatic actuators. Pressure range is 200 psi for full cut disk from 2" to 12", 150 psi for full cut disk from 14" to 30" and 75 psi for under cut disks. Temperature range is dependent on the type of seats and ranges from -40° to 350°F up to 0° to 350°F. See the Available Seat Material Chart for seat types.Series 600/622 Specifications and Options |
|
Series GTD High Seal Soft Seat Butterfly ValvesDynaQuip Series GTD High Performance Butterfly valves are designed so that the elasticity of the seat and fluid pressure assures perfect "bubble-tight" sealing. These valves are the result of years of experience in the design and manufacture of products for a variety of applications. Our valves are designed and tested to meet or exceed the most exacting standard of our industries.A wide range of applications from vacuum to very high pressure service, and from low to very high temperature service. Suitable for any severe process lines. Excellent control characteristics that allow throttle control of flows. Bubble-tight shut-off capability. Applications in many industries such as:
Series GTD Specifications and Options |
|
Series FSD High Seal Fire-safe Seat Butterfly ValvesDynaQuip Series FSD High Performance Butterfly valves are designed so that after a fire, when the RTFE seat has burned away, the supplementary metal sealing seat activates automatically and prevents excessive flow. These valves are the result of years of experience in the design and manufacture of products for a variety of applications. Our valves are designed and tested to meet or exceed the most exacting standard of our industries.A wide range of applications from vacuum to very high pressure service, and from low to very high temperature service. Suitable for any severe process lines. Excellent control characteristics that allow throttle control of flows. Bubble-tight shut-off capability. Applications in many industries such as:
Series FSD Specifications and Options |
|
Series MTD High Seal Metal Seat Butterfly ValvesDynaQuip Series MTD High Performance Butterfly valves are designed to offer a very high sealing capacity with an unusually low leakage rate. These valves are the result of years of experience in the design and manufacture of products for a variety of applications. Our valves are designed and tested to meet or exceed the most exacting standard of our industries.A wide range of applications from vacuum to very high pressure service, and from low to very high temperature service. Suitable for any severe process lines. Excellent control characteristics that allow throttle control of flows. Bubble-tight shut-off capability. Applications in many industries such as:
Series MTD Specifications and Options |
Flo-Products Home
Pneumatic Products